Aimpoint ACRO P-2 Red Dot Reflex Sight – FDE
$649.00
Aimpoint has once again advanced the standard for pistol mounted optics with the introduction of the Acro P-2 red dot sight. This next generation sight incorporates an improved LED emitter coupled with a higher capacity CR2032 battery to provide an astonishing five years (50,000hrs) of constant-on power while getting you on target faster and more accurately. Designed to endure the physical forces generated by semi-automatic pistol slides, the ACRO series was the first pistol sight to offer a fully enclosed optical channel to protect the LED emitter. Built to exceed the requirements of professional users, the Acro P-2 has been tested and proven to withstand the extreme shock, vibration, temperatures, and material stresses generated by firing over 20,000 rounds of .40 S&W ammunition. The new high efficiency LED emitter provides a sharp 3.5MOA dot. Protective clear glass front and rear lenses guard the advanced reflective lens system. The new digital intensity adjustment keypad provides a more distinct tactile feel when adjusting the dot intensity, and these controls are now placed next to the battery compartment to help protect the power adjustments against unintentional changes. In addition to use as a primary optic on handguns, the Acro P-2 can be mounted on carbines, shotguns, and rifles or utilized as a backup sight on magnified scopes and thermal imagers. The sight can be mounted on a wide range of optics-ready handguns using adapter plates. It is night vision compatible, and the dot can also be turned up for use in bright sunlight. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence.
- Adjustment 1 Click: 20mm at 100m/.7″ at 100yds
- Battery Life: 50,000hrs at daylight setting 6 (15,000 Lux, room temperature)
- Battery Type: CR2032
- Chemical Resistance: Withstands contamination by weapons cleaners, lubricants, fuels, and insect repellent
- Clear Aperture: 15mm x 15mm/.59″ x .59″
- Color Housing: FDE
- Daylight (DL) Settings: 6
- Dimensions: 1.9″ x 1.3″ x 1.2″ (47mm x 33mm x 31mm)
- Diode: LED (Light Emitting Diode) totally eye safe
- Dot Color: Red
- Dot Size: 3.5MOA
- Eye Relief: Unlimited
- Height of Optical Axis: 14mm/.6″ measured from top surface of mechanical interface
- Humidity- Operable during and after humidity limits: 95% (RH), +20°C to +50°C (+68°F to +122°F), cyclic (Temp)
- Laser: No Laser Emission
- Light Source Wavelength: 650nm red light
- Magnification: 1x
- Material Housing and Tube: High Strength Aluminum
- Model: 200777
- Mounting Platform: Acro interface
- Mounting Solution: Integrated Acro interface
- Night Vision Device (NVD) Compatible: Yes
- Night Vision Device (NVD) Settings: 4
- Operating Principle: Reflex collimator red dot sight
- Operating Temperature Range: -45°C to +71°C/-49°F to +160°F
- Optical Coating: Anti-reflex coating all surfaces and multilayer coating objective lens
- Optical Signature: No optical signature visible at 10 meter distance, front side, on appropriate NVD settings
- Parallax: Operationally parallax free – No centering required
- Power Switch: Push-Buttons
- Shock: Tested with 20,000rds mounted on a .40 S&W caliber pistol slide
- Start Setting: Position 7
- Submersible To: 35m/115′
- Surface Finish Housing: Anodized
- Temperature Range Storage: -51°C to +71°C/-60°F to +160°F
- Temperature Shock: Operable after a temperature shock between -45°C and +71°C/-49°F and +160°F
- Torque (Mount to Rail): 2.2′-lb to 26″-lbs
- Torque (Mount to Sight): 2.2′-lb to 26″-lbs
- Transmission: Average 70% in the range 420-900nm
- Vibration Direction: X, Y, and Z
- Vibration Sinusoidal Frequency Range: 10-150Hz
- Vibration Time: 30min/direction
- Weight (Without Mounting Solution): 2.1oz (60g)